CRE - GENSYS Compact Prime II HMI (A56-PRIME-00-B)
CRE - GENSYS Compact Prime II HMI (A56-PRIME-00-B) All-In-One Synchronizing and Paralleling Generator Controller
The GENSYS Compact Prime is designed primarily for gensets used in power plant applications that require synchronization, active and reactive load sharing and electrical/mechanical protections. It offers flexibility and time savings thanks to its simple wiring, full feature set, thoughtful engineering and easy programming.
The Compact Prime is available in both a switchboard panel mounted version with display, or a core base mounted version. It’s also compatible with the i4GEN touchscreen color display. This model is configurable from its front panel display, from i4GEN, or through the free CRE software.
This paralleling controller offers complete engine control of your diesel, gasoline or natural gas gensets, which includes preheating, pre-glow, ignition and start/stop functions. Warmup and cool down can occur at idle or nominal speed. You also have capabilities for alternative or consecutive multiple starter management. Best yet, the Contact Prime is compatible with all J1939 electronic engines.
Larger Image: Front & Rear View of Controller
Features:
• Remote start and test mode available ON/OFF load
• Isochronous and Iso-voltage active & reactive load sharing
• Fixed kW/KVAR load or droop mode
• Frequency and voltage control compensation for generators with droop governors and/or AVR/DVR
• Synchronization and dead bus management
• Static synchronization: gensets breakers closing without excitation
• Dynamic synchronization: frequency, phase & voltage synchronization
• Synch check (ANSI 25) + phase sequence protection
• New optimized PID loop with exceptional performance in synchronization, KW and KVAR control
• Override mode (protections inhibition + dedicated hour meter) following NFE 37-312 certification
• Non-essential load control on overload
• Battery boost management
• Configurable maintenance cycle
• Two password levels
Literature
- GENSYS Compact Prime Sales Bulletin
- GENSYS Compact Range Comparison Sheet
- Paralleling Solutions Bulletin
- Harness Information Technical Documentation
- GENSYS Compact Prime Technical Documentation
- GENSYS Compact Prime Wiring Diagram
- Application Note - Analog Input Wiring
- GENSYS Compact Prime Case Study: Production Power Plant Application
- Setting Up Murphy Senders in the CRE Controller
- Technical Documentation: Ethernet Connection Instructions
MurCal is an Authorized Distributor of CRE Technology products.
MurCal provides experienced application and product support, before and after the sale.
For California customers: Prop 65 WARNING: This product may have been manufactured with or uses components that can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov
- GENSYS Compact Prime Sales Bulletin
- GENSYS Compact Range Comparison Sheet
- Paralleling Solutions Bulletin
- Harness Information Technical Documentation
- GENSYS Compact Prime Technical Documentation
- GENSYS Compact Prime Wiring Diagram
- Application Note - Analog Input Wiring
- GENSYS Compact Prime Case Study: Production Power Plant Application
- Setting Up Murphy Senders in the CRE Controller
- Technical Documentation: Ethernet Connection Instructions