Blink-PowerKey 1000 Keypad (PK-1000) 10 key
PowerKey PK-1000 Keypad
The PowerKey1000 Series is the flagship model for Blink Marine’s IP67 keypads. It's available with CANopen and J1939 protocols. Compact and elegant, the rubber of the PowerKey can be personalized for both the icons and the numbers of led assigned to each individual key. The keypads are also clearly visible in the dark thanks to RGB backlight.
On the software side, you may assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simultaneously. This keypad no longer has to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate. Additionally, the keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.
Larger Image: PowerKey PK-1000 Keypad
Software Features:
• CAN and RS485 Keypad Addresses – Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simultaneously.
• J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.
• Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.
• Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.
• Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.
• CANopen Communications Protocol – Fully compliant with Device Profile 401d.
Hardware Features:
• IP67/IP69K waterproof rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against high pressure water at high temperature spray downs.
• UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.
Standard Features:
• Custom laser etched icons
• Multiple LED status indicators per function
• Low profile
• Vertical or horizontal mount
• Flush or front mount
• LED backlit icons
• Compact
• ON/OFF, momentary, toggle & scroll
• Programmer’s manual available to help support plug-and-play reconfigurability
• Available in fixed legends.
Literature:
MurCal is an Authorized Distributor of Blink Marine products.
MurCal provides experienced application and product support, before and after the sale.
For California customers: Prop 65 WARNING: This product may have been manufactured with or uses components that can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov