|
|
| PV101-A (78700244) : PowerView™ Display Module |
 |
 |
|
The PV101-A PowerView™ display is a multifunction tool which enables equipment operators to view many standard engine and transmission parameters as well as active and stored trouble codes. The display can show either a single parameter or a quadrant display showing four parameters simultaneously. Diagnostic capabilities include codes with text translation for the most common fault conditions. The enhanced alarm indication has ultra-bright alarm and shutdown LEDs (amber and red).
The PV101-A will display over 50 standard SAE J1939 parameters broadcast by engine and transmission ECU’s, as well as displaying active and ECU-stored faults with text description for diagnosing equipment malfunctions. The PV101-A has simple connections to optional components.
The PV101-A display replaces its predecessor, the PV100, offering enhanced features and improved durability, including:
Improved case design − upgraded assembly process and overall robustness of the case, with only slight dimensional changes that should not affect existing installations.
Voltage range − wider operational voltage range of 6.5-32 VDC.
Improved keypad response − improved keypad sensitivity and performance using the latest technology.
Lighting − brightened and improved backlighting and LED alarm lights for greater visibility.
Italian language option − Italian now joins English, Spanish, French and German as an additional language option.
Option for Murphy fuel sender input − choice of using the backlighting dimmer input as a fuel sender input.
Full compatibility − The PV101-A display is compatible with all our current J1939 gages, as well as additional J1939 I/O modules coming in 2007. It is also fully backward compatible with the PV100.
Other components in the MurphyLink® system include micro-processor-based PowerView Analog Gages for displaying critical engine data broadcast by an electronic engine or transmission’s Engine Control Unit (ECU); engine RPM, oil pressure, coolant temperature, system voltage, and a combination audible alarm and relay unit for warning and shutdown annunciation. Up to 32 components may be linked to the PowerView™ using a simple daisy chain wire connection scheme using RS485. The PowerView and all connected components can be powered by either 12 or 24-volt systems.
Sales Brochure
Sales Bulletin
User's Guide
Wiring Diagrams (w/ optional PVA Gages)
Implementation of SAE J1939 Parameters
Troubleshooting
|
|
|
|
If you like this item, you May also like these: |
|
|
|
|
|
|
Customers Also Bought |
|
|
|
|
|
|
|
|
|
