ESP-100 Pressure Sender (05701857)

ESP-100: 1-wire-to-ground pressure sender for use with electric pressure gages; 100 psi maximum (05701857)

The ESP-100 is a 1-wire-to-ground pressure sender for use with electric pressure gages. This pressure sender is rated at 100 psi (689 kPa) [6.89 bar] maximum. The manufacturer recommends mounting off-equipment. The ESP-100 is designed to be used in conjunction with our EG Series Swichgage® Instruments as well as CAN I/O modules. NOTE: Always provide proper circuit protection with fuses or circuit breakers.

Literature:
 

1. Sales Bulletin
2. Electric Gage Series Brochure
3. Installation Instructions (1999)
4. Installation Instructions (2008)
5. Installation Instructions for Off-Equipment Mounting Kit #30000213 of Gear Oil Pressure Sender
6. Resistive Table for Electric Gage Pressure Senders

MurCal is an Authorized Distributor of Murphy by Enovation products.
MurCal provides experienced application and product support, before and after the sale.

For California customers: Prop 65 WARNING: This product may have been manufactured with or uses components that can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov