|
|
| Sentinel 150, 12V-10A (NFPA 110), Enclosed Battery Charger (42703650) |
 |
 |
|
The Sentinel 150, 12V, 10A Battery Charger provides high performance charging for continuous float charge and standby power applications. It is configured for fast, accurate charging, to give optimum battery life and reliability. Smooth output allows charging of sealed or vented batteries, or use as a stand-alone power supply.
The Sentinel 150 features an intelligent, multi-stage charge regime: during charge recovery mode, the Sentinel gives a constant (maximum) current output; as the battery approaches peak charge, the output reverts to float charge mode, maintaining an optimum cell voltage and supplying additional standing load current up to the rated maximum. Output current is always limited to the rated maximum, even during high load (e.g. engine cranking), short-circuit or reverse polarity connection. NFPA 110 compliant alarm outputs and metering: alarms for AC failure, charge fail, high battery volts, low battery volts.
This model features high rate-low ripple charging, switch mode power supply technology, AutoBoost, temperature compensation, and alarm outputs. The UL-listed, stainless-steel, wall-mounted enclosure measures 6.50" (165 mm) wide, 11.81" (300 mm) high, and 4.92" (125 mm) deep. Weight: 4.4 lbs (2.0 kg)
This 12V model charges battery types: Vented lead acid (6 cells), Calcium-Calcium (6 cells), VRLA / AGM (6 cells), VRLA / Gel (6 cells), NiCd (10 cells).
Sales Bulletin
|
|
|
|
|
|
|
