|
|
| TTDJ-IGN-T (50700112) Digital Fault Annunciator |
 |
 |
|
The innovative new TTDJ-IGN-T gives you a configurable annunciator with a built-in power supply, hourmeter and tachometer. Powered by 90-350 VDC negative ground CD ignition, this TTDJ displays any fault from the sensor inputs, elapsed engine running time and engine speed. Membrane keys for easy operation and configuration are located on the faceplate.
Highly reliable and versatile, the TTDJ-IGN-T accepts 32 sensor inputs supplied from normally open and normally closed sensors. Each of the first 16 inputs can be easily configured for Shutdown or Alarm Before Shutdown, which is a function that causes annunciation and the alarm output, but will not cause a shutdown. Each of the first 16 inputs can be locked out by one of two Start-Run timers or configured as a Class C lockout. The Start-Run timers are adjustable from: 0-5 minutes (B1); 0-9 minutes (B2).
* Sensor Inputs: 32 N.O. or N.C. passive switches.
* Inputs 1-16: Configurable as Class "A", "B1", "B2" or "C" shutdown or alarm before shutdown.
* Inputs 17-28: Dedicated Class "A" shutdowns.
* Input 29: Selectable as Class "A" or Class "ESD".
* Input 30: Selectable Remote Reset or Class "A".
* Input 31: Remote Lockout or Class "A"; inhibits the Class "B1 & B2" Lockout Timers.
* Input 32: Overrides Test Timer, typically used for emergency shutdown.
* Outputs: 0.5 A @ 350 VDC.
* Outputs Selection: Ground ignition immediately or trip fuel valve and ground ignition after time delay.
* Hourmeter Range: 0 to 65535 hours.
* On-Board Backup Power: 6 VDC, 1300 mAh, Duracell DL223A or Sanyo CR-P2 Lithium battery.
* Product Dimensions: 6.5"H x 6.5"W x 3-3/8"D.
Sales Bulletin
Installation & Operations Manual
Installation Drawing: Field Wiring Connections
|
|
|
|
If you like this item, you May also like these: |
|
|
|
|
|
|
Customers Also Bought |
|
|
|
|
|
|
|
|
|
