(0)No Reviews yet
SKU: PV780T-VT: (78700564) *USED*
For Price and Availability Please email us at sales@murcal.com or call us 661.272.4700

This item is IN STOCK

Current Stock: 5

PowerView® PV780T Touch Display *USED* - WHILE SUPPLIES LAST

This is a *USED in Good Condition* unit.  It is not covered under warranty.

The PowerView® PV780T display is a full featured, configurable display that combines engine, transmission and diagnostic information into an easy-to-read operator interface. Equipment functionality can be further integrated through the available I/O and controlled via the CANbus.

The PV780 features a full color, 7-inch bonded LCD for brighter, smoother graphics and best in class sunlight readability. The rugged design makes this display a great solution for extreme environments.

The PV780 display is compatible with PowerVision Configuration Studio which allows users to edit CAN parameters, add OEM branding and create custom equipment screens for a unique and sophisticated user interface.



  • CAN-Based Display With Rich, Full-Color Graphics
  • Compatible With Both Mechanical and Electronic Engines
  • Tier 4/Euro Stage IV ready
  • Sunlight Readable LCD
  • Rugged Design for Extreme Environments
  • Multiple Languages
  • Easy-to-Use Configuration Software



  • Display: 7-inch (178mm) color transmissive TFT LCD
  • Resolution: WVGA, 800 x 480 pixels, 16-bit color
  • Aspect Ratio: 16:9
  • Orientation: Landscape or Portrait
  • Backlighting: LED, 1000 nit maximum brightness
  • Microprocessor: Freescale i.MX357, 32 bit, 532 MHz, ARM11 core
  • QNX Real-time Operating System
  • Flash Memory: 2 GB total, 1 GB available for data logging
  • RAM: 128 Mbytes SRAM
  • Operating Voltage: 6-36 VDC, reverse polarity protected
  • Video inputs: 3 NTSC/PAL
  • Connectors: Two (2) AMPSEAL 23 Pin (AMP 770680-1 and AMP 770680-4)
  • Keyboard: 10 tactile pushbuttons with white LED backlight
  • USB: (1) USB 2.0 host (OTG, full speed)
  • Real time clock with Li-ion rechargeable battery backup



  • (2) CAN 2.0B with one isolated (NMEA 2000 compliant); J1939 and CANopen protocols; proprietary messaging
  • (1) RS-485 serial (MODBus master/slave)
  • (1) USB Host (OTG)



  • Digital 500mA, switched low side
  • Frequency Out (2 Hz - 3 kHz) 0-V Battery, peak to peak, square wave



  • (3) Analog 0-5VDC, 4-20 mA, or resistive
  • (5) Discreet Digital 0-5V, Active High
  • (1) Frequency Input, configurable to support measurement frequencies from 2 Hz - 10 kHz



  1. Sales Bulletin
  2. Sales Insert
  3. Installation Manual
  4. Operation Manual



For California customers: Prop 65 WARNING: This product may have been manufactured with or uses components that can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov

Ratings & Reviews

No reviews available

Be the first to Write a Review