RP2310B Push/Pull DC Solenoid (40700095)
RP2310B: Push/Pull DC Solenoid; 24VDC; 1-1/2" stroke (40700095)
The Murphy RP2310B Push/Pull DC Solenoid provides single unit versatility for engine applications, such as shutdown.
This 24 volt model gives a one and a half inch (38 mm) stroke at 14 pounds (62N) and holds up to 34 pounds (151N) at full voltage, continuous duty.
The unit will operate at any stroke less than maximum, such as 1/2 or 3/4 stroke.
The RP2310B measures 7-7/32" in length with the plunger seated (coil energized), 2-7/8" in height and 3-1/8" across the base.
It ships complete with return spring and rubber seal boot.
MurCal is an Authorized Distributor of Enovation Controls products.
MurCal provides experienced application and product support, before and after the sale.
For California customers: Prop 65 WARNING: This product may have been manufactured with or uses components that can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.