Cascade (40700259): Auto Start/Stop Controller
The Cascade CD101 Controller is fully compatible with all major engine types. Whether you are running standard or J1939 engines, the controller will work with your application. Here are some of the unique features of the Cascade:
DURABILITY: Encapsulated protection against dirt, water and dust, along with a compression gasket to fully seal it to the panel ? rated NEMA4 and IP65.
LOW BATTERY BLACKOUTS: Operates in total blackout for a minimum of 2 seconds.
COMPATIBILITY: Accepts MPU, AC Frequency and ECU speed signals and can operate with standard engines and J1939 engines.
INPUTS AND OUTPUTS: The Cascade's inputs and outputs are ruggedly protected and fault tolerant:
Inputs: Dedicated digital inputs for low oil pressure, high engine temperature, remote start, DC charge fail/Alternator fail. Two aux inputs are configurable for multiple functions.
Outputs: 7 - 4 auxiliary, configurable (1A DC protected). 3 dedicated outputs for Crank, Fuel/ECU, Alternator excitation.
J1939 READY: Works directly with Murphy's J1939-ready PowerView gages. Just plug and go - no sender is required.
POWER INPUTS: 9 - 35 VDC continuous; operates during total blackout for 2 seconds minimum.
HOUSING: UV stabilized black polycarbonate and epoxy encapsulation. Weather tight and includes sealing gasket to keep moisture and debris out of enclosure.
For California customers: Prop 65 WARNING: This product may have been manufactured with or uses components that can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.