How to Install a Flyback/Clamping Diode
Published on
July 29, 2022 at 1:37:46 PM PDT July 29, 2022 at 1:37:46 PM PDTth, July 29, 2022 at 1:37:46 PM PDT
Step 1. Stop the engine and disconnect the battery ground cable.
Step 2. Remove the two terminal nuts from the Injection Pump Solenoid. Leave existing wires in place.
Step 3. Place the Diode Package red wire over the “hot” (Battery +) terminal. (See drawing above.)
Step 4. Place the black wire over the ground (Battery –) terminal.
Step 5. Replace the terminal nuts and tighten securely.
Step 6. Reconnect the battery ground cable
Link to the Diode Package product (65000343)
---
Article From Our Partner: Enovation Controls "Installing a Flyback/Clamping Diode. 29 July 2022